Description

5.0 Coyote Engine / 6R80W Transmission Package

We are offering The Gen 3 Coyote / 700+HP Supercharged Engine & 6R80W Transmission PKG in a very complete package, please check the Product specifications and if you have any questions feel free to contact us.

5.0 Coyote 700+ HP  –  6R80W  6 Speed Transmission Combo

• GEN 3 Coyote 5.0L (302 cubic inches)

• 12:1 compression ratio (nominal)

• Hyperuetectic pistons with Graphal® low friction coating

• Forged Crankshaft

• Manley® H-beam connecting rods with ARP® 2000 bolts

• BOSS 302 connecting rod bearings
• Lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength
• Moroso Low profile Rear sump Retrofit oil pan with 8qt capacity features optimized oil drain back and windage tray to control oil and improve high-rpm performance

• Tuned Lower intake Plenum manifold with production drive by wire – upgraded Throttle Body

• Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction with Boss Valve Springs

• The Ford Racing “Coyote” Engine Control Pack includes a PCM with Ford Racing calibration, an Electronic Throttle Control accelerator pedal, a unique downsized power distribution module, an Airbox with an inlet tube, an MAF sensor with bolts, and EGO sensors.

• Front Timing Cover and Harmonic Balancer

• Hardened Gerotor Oil Pump

• Includes colder heat range zero (0) spark plugs, VMP – Loki 2.65L with Small Pulley FOR 5.0L COYOTE SUPERCHARGER KIT

• Includes Ford Racing oil filter
• Oil Separator mounted in Place on the Passenger side Valve cover to Plenum

• 6 Speed Flexplate with Hardened bolts

• Vehicle harness and PCM  included, designed for street rod/project car installation.

• Remote Mount Filter Adapter  available for applications requiring oil filter relocation

• Engine mount bosses and bell housing mount patterns common to 4.6L modular engines.

• Hose fittings ie.  Heater, PCV
• Oil Filter Relocation Kit

• Includes Alternator, AC Compressor, and P/S Kit with Brackets and Pulleys.

• 6R80W Re-engineered 6 Speed Transmission with matching converter, hardware  Shipped with Engine as one unit.

• Universal shifter Cable High Torque Starter Installed

• Ford ST Install Hardware kitHP TUNER CREDITS RTD and remote LUND Tune Session included