Edelbrock LS E-Force Supercharged Crate Engine

Code: TD-46760


In Stock


Edelbrock LS E-Force Supercharged Crate Engine

TD motion offer this complete 416 c.i.d. supercharged, LS engine. THis engine produces an astounding 720 horsepower and 695 ft-lbs. of torque, on 91 octane pump gas.

2 reviews for Edelbrock LS E-Force Supercharged Crate Engine

  1. George Cumberland

    What is the Warranty on this Setup?

    • admin

      2 Years / Unlimited Miles

  2. John Sewell

    Dropping into my Chevy Truck Restomod. Let you know how she Runs. So Far So Good!!

Add a review

Your email address will not be published. Required fields are marked *

The foundation of this engine is a Brand new, aluminum LS3 block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. The 4.0″ stroke, and 4.065″ bore pushes this LS3 out to a whopping 416 c.i.d., for incredible low end torque. The 9.5:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. ****Includes Full Pulley and Accessory Kit. Don’t be Misguided by Mass Retailers that offer cheaper without the Pulleys


Supercharged LS 416 Crate Engine with Accessories & Electronics
This engine package is our most complete solution.

  • Complete Brand New LS3 Engine.
  • Includes Wiring Harness,  Precalibrated ECU
  • Throttle Pedal
  • MAFS
  • Throttle Body
  • Ignition Coils
  • All necessary sensors including Heated O2 Sensors
  • Water Pump
  • Full Accessory Drive KIT Installed. Includes Power Steering Pump, Alternator, Brackets, Idler Pulleys, Hardware and Serpentine Belt

Chevy small block Gen III/IV (LS-based engines)

LS Resto-mod Projects,  Late Model Corvette and Camaros Etc.

Helping this engine breathe is the Edelbrock E-Force LS3 supercharger system. This great looking system features Eaton TVS 2300cc/rev rotors, which provide unparalleled efficiency, whisper quiet operation and OEM reliability. This engine package comes complete with essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb/hr. fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver’s side throttle body orientation for ease of intake routing and a Corvette belt offset for a compact installation. (Other belt offsets and inlet orientations available upon request.) Pair with universal heat exchangers #15405, #15406 or #15407 for a complete installation.

You may also like…