Lincoln Continental Coyote Engine and 6R80W Transmission Pkg 1961-69
Original price was: $25,595.00.$24,995.00Current price is: $24,995.00.
The Lincoln Continental Coyote Engine, delivers exceptional power and performance. This advanced Coyote engine is engineered to provide impressive horsepower and torque, enhancing your Continental’s acceleration and driving dynamics. This engine combines modern performance with the classic elegance of your vehicle.
- Description
Description
Lincoln Continental Coyote Engine
This coyote engine / trans setup is for the early Lincoln Continental. Includes a modified oil pan.
This is based upon the GEN 2 Coyote which talks directly with the 6R80W trans. controller very little calibration is needed. Can go with a 460HP Gen 3 will require a separate controller. Factored with the serpentine pulley system that reconfigures the accessories for fitment in the early Lincoln Continental Coyote Engine. Locates the alternator and AC on the driver’s side, and moves the tensioner further up. Power steering and on the driver’s side. Options are listed below for other misc items like mounts, exhaust, Radiator kit, mounts etc for the swap to make the installation go more smoothly. Warranty is 2 years / 24,000 miles. Very complete pkg. This kit below includes the universal fuel lines and fittings already.
5.0 Coyote 400 HP – 6 Speed Auto Transmission Combo
5.0L (302 cubic inches) GEN 2 Engine
10.5:1 compression ratio (nominal)
Hypereutectic pistons with Graphal® low friction coating
Manley® H-beam connecting rods with ARP® 2000 bolts
302 connecting rod bearings
Lightweight aluminium cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength
Special order Lower profile rear sump oil pan with 8qt capacity features optimized oil drain-back and windage tray to control oil and improve high-rpm performance and Diptube
Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body
Four-valve-per-cylinder aluminium heads with roller-finger followers reduce friction with Boss Valve Springs
Ford Racing engine cover kit
The Ford Racing “Coyote” Engine Control Pack includes a PCM with Ford Racing calibration, an Electronic Throttle Control accelerator pedal, a unique downsized power distribution module, an Airbox with an inlet tube, an MAF sensor with bolts, and EGO sensors.
Front Timing Cover and Harmonic Balancer
Includes colder heat range zero (0) spark plugs,
Includes Ford Racing oil filter
6 Speed Automatic Flexplate with Hardened bolts
Vehicle harness and PCM included PCM Bracket designed for street rod/project car installation.
Remote Mount Filter Adapter available for applications requiring oil filter relocation
Includes 140 amp Alternator, Brackets, (Power Steering Pump, AC Compressor additional) and Belt installed
PCM Bracket, H Pipe for the heater, coolant bleeder valve, Universal Heater Hose Kit
6R80 6 Speed Automatic Transmission Re-engineered to withstand 650HP with midpalate and separate Controller
High Torque Starter
External Fuel Pump and fuel line kit
Transmission Fitting Kit – Bolts, Midplate and Inspection Plate